<code id="w3r1f"></code>
<track id="w3r1f"><ruby id="w3r1f"><menu id="w3r1f"></menu></ruby></track>
  • <track id="w3r1f"><strike id="w3r1f"></strike></track>
    <td id="w3r1f"><ruby id="w3r1f"></ruby></td>
  • <track id="w3r1f"><ruby id="w3r1f"></ruby></track>

  • Welcome to Luoyang Haotai Copper Co., Ltd.! Set front page Favorites

    Field of application
    Position:HOME > Field of application

    Copper:

    Code number

    Product Category

    The main features

    Application examples

    T2

    Boards, belts, tubes, rods, foils, wires

    Has good electrical conductivity, thermal conductivity, corrosion resistance and processing performance, can be welded and brazed. With less conductive, thermal conductivity impurities, trace oxygen has little effect on the conductivity, thermal conductivity and processing properties, but easily lead to "hydrogen disease", not suitable for processing in high temperature (such as> 370 °C) reducing atmosphere (anneal , welding, etc.) and use

    Used as conductive, thermal, and corrosion resistant equipment. Such as wires, cables, conductive screws, blasting detonators, chemical evaporators, storage and various pipelines.

    T2 guide

    Boards, belts, tubes, rods, foils, wires

    High purity, conductivity of not less than 98%,

    Used as transformer special copper tape

    TU1 
    TU2

    Boards, strips, tubes, rods, wires

    High purity, excellent electrical and thermal conductivity, no "Hydrogenosis " or minimal "Hydrogenosis " , good processing and welding, corrosion and cold resistance

    Mainly used as electric vacuum instrumentation device

    TP1

    Boards, belts, tubes

    The welding performance and cold bending performance are good. Generally, there is no tendency of “Hydrogen disease  . It can be processed and used in a reducing atmosphere, but it should not be processed and used in an oxidizing atmosphere. TP1 has less residual phosphor than TP2, so its conductivity and thermal conductivity are higher than those of TP2.

    Mainly in pipe applications, it can also be supplied in plates, belts or rods. Used as petrol or gas conveying pipe, drain pipe, condensing pipe, mine tube, condenser, evaporator, heat exchanger, train box parts

    TP2

    Boards, strips, tubes, rods, wires

    TAg0.1

    Boards, tubes

    The addition of a small amount of silver to copper can significantly increase the softening temperature (recrystallization temperature) and creep strength, while the copper's electrical conductivity, thermal conductivity and plasticity are rarely reduced. The silver-copper used has not significant effect of age-hardening, and the cold hardening is generally used to increase the strength. It has good wear resistance, electrical contact and corrosion resistance. When it is made into tram lines, its service life is 2~4 times higher than that of ordinary hard copper.

    Used as heat-resistant, conductive equipment. Such as motor commutator pieces, generator rotor conductors, spot welding electrodes, communication lines, leads, wires, electron tube materials, etc.


    Brass:

    Code number

    Product Category

    The main features

    Application examples

    H96

    Boards, belts, tubes, rods

    The strength is higher than that of pure copper (but it is the lowest in common brass), it has good thermal and electrical conductivity, high corrosion resistance in the atmosphere and fresh water, good plasticity, easy cold and hot pressure processing, Easy to weld, forge and tin plate without stress corrosion cracking tendency

    Used as a conduit, condenser, radiator tube, heat sink, automotive water tank belt, and conductive parts in general machinery manufacturing

    H90

    Boards, belts, bars, lines

    Similar performance to H96 but slightly higher strength than H96, metallized and coated

    Water Supply and Drainage Pipes, Medals, Artwork, Water Tank Strips, and Bimetals

    H85

    tube

    Has high strength, good plasticity, can withstand well, hot pressure processing, welding and corrosion resistance are also good

    Condensation and heat dissipation tubes, siphon tubes, serpentine tubes, and cooling equipment

    H80

    Boards, belts, tubes, rods

    The performance is similar to that of H85, but the strength is higher and the plasticity is better. It has higher corrosion resistance in atmosphere, fresh water and seawater.

    Paper-making nets, thin-walled pipes, corrugated pipes and house construction supplies

    H70

    Boards, belts, tubes, rods

    Very good plasticity (best in brass) and high strength, good machinability, easy welding, very stable to general corrosion, but easy to produce corrosion cracking. H68 is the most widely used type of ordinary brass 
               H68A added a trace amount of arsenic (As), can prevent brass dezincification, and improve the corrosion resistance of brass

    Complex cold and deep-drawn parts such as radiator housings, ducts, bellows, cartridges, spacers, detonators, etc.

    H68

    Boards, belts, tubes, rods, foils, wires

    H68A

    tube

    H65

    Board, strip, line

    The performance is between H68 and H62. The price is cheaper than H68. It also has high strength and plasticity. It can withstand cold and hot pressure processing well. It has a tendency to corrosion cracking.

    Electrical connectors, sanitary equipment, terminals, clocks, lamps, etc.; also used in musical instruments, decorative materials and military buttons

    H62

    Boards, belts, tubes, rods, foils, wires

    Good mechanical properties, good plasticity in hot state, plasticity in cold state, good machinability, easy brazing and welding, corrosion resistance, but easy to produce corrosion cracking, in addition to low price, is an ordinary yellow widely used Copper species

    All kinds of stressed parts such as pins, rivets, washers, nuts, pipes, barometer springs, screens, radiator parts, etc.

    HPb59-1

    Boards, strips, tubes, rods, wires

    Wide application of lead brass, it is characterized by good machinability, good mechanical properties, can withstand cold and hot pressure processing, easy brazing and welding, good corrosion stability in general, but there is corrosion cracking tendency

    Various structural parts suitable for hot stamping and cutting, such as nuts, washers, gaskets, bushings, nuts, nozzles, etc.

    HPb60-2

    Boards, belts

    Good machinability and high strength, other properties same as HPb59-1

    For high-strength, high-machining structural parts

    HSn62-1

    Boards, strips, tubes, rods, wires

    High corrosion resistance in seawater, good mechanical properties, cold brittleness during cold working, only suitable for hot pressing, good machinability, easy welding and brazing, but prone to corrosion cracking

    Used as a ship part or other part in contact with seawater or petrol

    HSn70-1

    tube

    Typical tin brass has high corrosion resistance in the atmosphere, steam, oils and seawater, and has good mechanical properties, good machinability, easy welding and brazing, pressure processing under cold and hot conditions Good sex, prone to corrosion cracking

    Corrosion resistant parts on seagoing vessels (such as condensing gas pipes), conduits in contact with seawater, steam, oils, thermal equipment parts

    HAl59-3-2

    Boards, belts, rods

    With high strength, corrosion resistance is the best among all brasses, with little tendency to corrosion cracking, low plasticity in cold state, and good pressure processability in hot state

    Engine and shipbuilding and other high-strength corrosion resistant parts that work at room temperature

    HAl66-6-3-2

    Boards, bars

    For the wear-resistant alloy, with high strength, hardness and wear resistance, corrosion resistance is good, but there is a tendency of corrosion cracking, plasticity is poor. Cast brass for transplantation

    Nuts and worms with fixed screws under heavy load; can be used as a substitute for aluminum bronze QAL10-4-4

    HAl77-2

    tube

    Typical aluminum brass, with high strength and hardness, good plasticity, pressure processing in hot and cold state, good corrosion resistance to seawater and salt water, resistance to impact corrosion, but dezincification and corrosion Rupture tendency

    Used as a condenser and other corrosion resistant parts in ship and beach thermal power stations

    HMn58-2 
    HMn58-3

    Boards, strips, tubes, rods, wires

    It has high corrosion resistance in seawater, superheated steam and chloride, but it has a tendency of corrosion cracking. It has good mechanical properties, low thermal conductivity, and is easy to perform pressure processing under hot conditions. Pressure processing properties are acceptable under cold conditions. Wide application of brass species

    Important parts and weak current industrial parts that work under corrosive conditions

    HMn57-3-1

    Boards, bars

    High strength, high hardness, low plasticity, can only be processed under pressure in hot state; Corrosion resistance in atmosphere, seawater and superheated steam is better than general brass, but there is tendency of corrosion cracking

    Corrosion-resistant structural parts

    HFe59-1-1

    Boards, rods, tubes

    High strength, toughness, good friction reduction performance, high corrosion resistance in atmosphere and seawater, but corrosion cracking tendency, plasticity in hot state

    Making structural parts that work under conditions of friction and seawater corrosion

    HSi80-3

    Baton

    Good mechanical properties, high corrosion resistance, no tendency to corrosion cracking, wear resistance, good pressure processability in cold and hot state, easy to weld and braze, good machinability, thermal conductivity is yellow The lowest in copper

    Ship parts, steam pipes and plumbing fittings

    HNi65-5

    Boards, bars

    Has high corrosion resistance and friction reduction, good mechanical properties, excellent pressure processing performance in cold and hot conditions, relatively stable to dezincification and "seasonal cracking " , low thermal conductivity, but due to the price of nickel More expensive, so the general use of Hni65-5 is not much

    Pressure gauge tube, papermaking net, condensing tube for ship, etc., can be used as a substitute for tin phosphor bronze and German silver


    Bronze:

    Alloy brand

    Product Category

    The main features

    Application examples

    QSn4-3

    Boards, belts, bars, lines

    It is zinc-bearing tin bronze, which has high wear resistance and elasticity, good magnetic resistance, can well withstand hot 
               or cold pressure processing; in the hard state, it has good machinability, easy welding and brazing, in the atmosphere, Good corrosion resistance in fresh water and seawater

    Production of springs (flat springs, round springs) and other elastic components, 
               corrosion resistant parts on chemical equipment, wear resistant parts (such as bushings, discs, bearings, etc.) and diamagnetic parts, scrapers for the paper industry

    QSn6.5-0.1

    Boards, Strips, Rods, Foil, Lines

    Phosphor bronze, high strength, elasticity, wear resistance and diamagnetic, good pressure processing in hot and cold state, high resistance to EDM, weldable and brazed, good machinability, Corrosion resistance in atmosphere and fresh water

    Produce spring contact pieces with good electrical conductivity, wear parts and diamagnetic parts in precision instruments such as gears, brush boxes, vibration plates, contactors

    QSn7-0.2

    Boards, belts, bars, lines

    Phosphor bronze, high strength, good elasticity and wear resistance, easy to weld and braze, good corrosion resistance in atmosphere, fresh water and seawater, good machinability, suitable for hot pressing

    Produce parts that withstand friction under moderate load and moderate sliding speed, such as anti-wear washers, bearings, bushings, turbines, etc., can also be used as springs, reeds, etc.

    QAL9-2

    Boards, belts, bars, lines

    Manganese-bearing aluminum bronze has high strength and good corrosion resistance in atmosphere, fresh water and seawater. It can be welded by electric welding and gas welding. It is not easy to be brazed. It has good press workability under hot and cold conditions.

    High-strength, corrosion-resistant parts and pipe fittings and parts on seagoing vessels operating in steam medium at 250°C

    QAL9-4

    Tubes, bars, lines

    For iron-containing aluminum bronze. High strength and anti-friction property, good corrosion resistance, good pressure processability in hot state, electric welding and gas welding, but poor brazing, can be used as a substitute for high-tin wear-resistant bronze

    Produce anti-wear and anti-corrosion parts that work under high loads, such as bearings, bushings, gears, turbines, valve seats, etc., also used to make bimetal wear parts

    QAL10-3-1.5

    Tubes, rods

    It is an aluminum bronze containing iron and manganese. It has high strength and wear resistance. After quenching and tempering, it can increase hardness. It has good high temperature corrosion resistance and oxidation resistance. It is resistant to atmospheric, fresh water and seawater. Very good erodability, good machinability, weldable, not brazed, good pressure workability in hot state

    Produce wear-resistant parts and various standard parts that work under high temperature conditions, such as gears, bearings, bushings, discs, guide rocker arms, flywheels, and fixing nuts. Can replace high-tin bronze production of important parts

    QAL10-4-4

    Tubes, rods

    Aluminum bronze containing iron and nickel elements belongs to high-strength heat-resistant bronzes. It has stable mechanical properties under high temperature (400°C), good antifriction properties, and good corrosion resistance in atmosphere, fresh water and seawater. Good press workability, heat treatable, weldable, not brazeable, good machinability

    High-strength wear parts and parts working at high temperatures (400°C), such as bushings, bushings, gears, ball seats, nuts, flanges, slides, etc., as well as various other important corrosion and wear parts

    QSi3-1

    Boards, Strips, Rods, Foil, Lines

    Silicon bronze with manganese added, high strength, elasticity and wear resistance, good plasticity, no brittleness at low temperatures, good welding with bronze, steel and other alloys, especially with good brazing; Corrosion resistance in fresh water, sea water and seawater is high. It is also very stable for caustic soda and chlorides. It can withstand cold and hot pressure processing, but it is not heat-treatable. It is usually used in Annealing Hardened state. High yield limit and elasticity

    Used for making various parts, springs and spring parts in corrosive media, as well as wear parts for turbines, worms, gears, bushings, brake pins and rods, also for making parts in welded structures. Instead of important tin bronze, even bronze

    QSi1-3

    Baton

    Silicon bronze containing manganese and nickel elements has high strength, very good wear resistance, can be heat-treated and strengthened, and its strength and hardness are greatly improved after quenching and tempering, and it has high corrosion resistance in atmosphere, fresh water and seawater. Good weldability and machinability

    Used for the manufacture of frictional parts (such as engine exhaust and intake valve guide bushings) and structural parts that work in corrosive media at temperatures below 300°C, poor lubrication, and low unit pressure operating conditions

    QSi3.5-3-1.5

    tube

    Silicon bronze with zinc, manganese, iron and other elements, the performance is the same as QSi3-1, but the heat resistance is better, and the tendency of self-cracking when bars and wires are stored is small

    Mainly used for bushing materials working at high temperatures

    QCr0.5

    Boards, bars, lines

    It has high strength and hardness at room temperature and high temperature (<400°C), good conductivity and thermal conductivity, good abrasion resistance and anti-friction property. After age hardening treatment, strength and hardness conductivity and Thermal conductivity is significantly improved; easy to weld and braze, has good corrosion resistance in the atmosphere and fresh water, high temperature oxidation resistance, can withstand stress processing in cold and hot conditions; but its disadvantage is The gap has a strong sensitivity, causes stress concentration at the notch and sharp corners, and is likely to cause mechanical damage, so it is not suitable for making commutator pieces.

    It is used to produce welding electrode, motor commutator and other parts that work at high temperature and require high strength, hardness, electrical conductivity and thermal conductivity. It can also be used in bimetal form. On brake discs and discs

    QCr0.5-0.2-0.1

    Boards, bars

    The addition of a small amount of magnesium, aluminum chromium bronze, compared with QCr0.5, not only to further improve the heat resistance and corrosion resistance, but also to improve the notch sensitivity, other properties and QCr0.5 similar

    Used for making electrodes, etc. on electric welding, roll welding machines, etc.

    QCr0.6-0.4-0.05

    Baton

    The addition of a small amount of barium and magnesium chromium bronze, compared with QCr0.5, can further increase the strength, hardness and heat resistance of the alloy, as well as good conductivity

    With QCr0.5

    QMg0.8

    line

    This is a copper alloy with a magnesium content of 0.7% to 0.85% Wmg. The trace Mg lowers the conductivity of copper, but it has a deoxidizing effect on copper and also improves the high temperature oxidation resistance of copper. In actual application of copper-magnesium alloys, the Mg content is generally less than 1% of Mg. If the Mg content is too high, the pressure processing performance deteriorates rapidly. Alloys of this type can only be worked hard and cannot be heat-treated

    The main role of cable cores and other wire materials


    Copper Cups:

    Alloy code

    Product Category

    The main features

    Application examples

    BFe10-1-1

    Boards, tubes

    The structure of iron-nickel-nickel-nickel, which contains less nickel, is lower in strength and hardness than BFe30-1-1, but it has higher plasticity and similar corrosion resistance.

    Mainly used in shipbuilding industry instead of BFe30-1-1 to make condensing pipes and other anti-corrosion parts

    BFe30-1-1

    Boards, tubes

    Structural copper-nickel alloys with good mechanical properties, high corrosion resistance in seawater, fresh water and steam, but poor processability

    Pipes for condensers and thermostats working in high-temperature, high-pressure and high-speed conditions in the manufacturing of marine vessels

    BZn15-20

    Boards, strips, foils, tubes, rods, wires

    For the structure of copper-nickel alloy, because its appearance has a beautiful silver-white, commonly known as German silver (it was originally Chinese silver), this alloy has high strength and corrosion resistance, good plasticity, both in hot and cold state are good Ground pressure processing, poor machinability, poor weldability, elasticity better than QSn6.5-0.1

    Used as instrument parts for working under humid conditions and in highly corrosive media, as well as medical equipment, industrial vessels, artwork, telecommunications industry parts, steam fittings and plumbing fittings, daily necessities, and spring tubes and reeds, etc.


    TOP

    lyhaotai@163.com

    +86-13633890211

    亚洲女同成av人片在线观看|色色视频免费看|欧美成人亚洲精品在线观看|天天日天天爽